Handverktyg

Blade of 2.5 mm carbon steel hardened to 58-60 HRC.

Allen key set for mm, 9 parts in plastic holder. Angle wrench with ball can be angled up to 30º, to access tight places.

Felt-tip pens fitted with an aluminum sleeve. For labeling and texting. Waterproof and quick drying. Sticks to most substrates such as paper, cardboard, glass, porcelain, etc. Free from xylene.
Artline 70. With round, fine tip 1.5 mm.
Artline 90 . With cut tip width 2-5 mm.

Measuring stick made of glass birch with joints of Swedish steel, which enables thin needles and a flexible measuring stick. Protective varnished with water-based varnish for increased resistance to dirt and moisture. The joints are heat treated, protective lacquered and oiled at three points to ensure first class performance. Metric graduation in black on both sides with red decimeter numbers.
Width: 17 mm.
Certified according to EU class III.

Impact-resistant plastic handle that fits in the hand. The finger guard has been developed to optimize safety. The blades have a good balance between length and width, which gives the user a better experience during use. The blade is made of high-quality carbon steel that is easy to resharpen. Carbon steel can be affected by moisture and corrosive environments, so get into the habit of wiping the knife and oiling the blade after use. Belt clip with smart button locking that makes it easy to mount or remove the knife sheath on the buttons of the work clothes. Shield with the dala weapon allows you to connect multiple sheaths. The knife sits securely in the knife sheath with an attachment that locks the handle with a click.
Blade thickness: 2 mm

Meter stick made of fiberglass-reinforced polyamide, which provides increased resistance to moisture. Foil-embossed grading that provides increased protection against abrasion. All joints lock in 90 degree increments. Metric graduation in black on both sides and red decimeter figures.
Width: 15 mm.
Certified according to EU class III.

Fridge and freezer thermometer in silver-coloured plastic. Length 160 mm. 
Measuring range: -50°C to +50°C.

Usage:
For filing flat surfaces, sharp corners and edges and for deburring. A double grade file should be used for work in high alloy tool steels. Also suitable for sharpening certain tools. High felling.
Design:
Straight edges, double grade, one edge without grade, one edge single grade.
Cutting:
Next to last the number in the model designation indicates chopping.
1 = Coarse, 2 = Medium, 3 = Fine.

Usage
Useful for all kinds of filing.
Gives high removal rate and good surface finish in most materials.
Design:
Rough single grade with chip breaker , an edge single degree.
Cutting:
The penultimate number in the model designation indicates the cut.
1 = Coarse.

Workbench with 22 mm thick beech laminate board - sides reinforced with angle iron. Collapsible base made of 40 mm tube construction. Wooden details varnished - metal parts powder coated. Dimensions folded: 1000x625x160 mm.

Powerful puller made of rust and zinc-plated chrome vanadium steel. Reversible arms for both indoor (C) and outdoor use (A). The puller feet are milled to increase the areas of use. Spindle with hardened steel ball for minimal friction.
Type 4532-0 has narrow special arms.
From type 4532-E, the pullers are equipped with induction-hardened spindle and in countersink design.

Powerful puller, flexible model, can be used as either a 2-arm or 3-arm puller with a simple hand grip. The arms can also be used for internal or external extraction. The arms lock under spring loading. Available in two sizes 4"-100 mm and 7"-178 mm.

Reliable laser meter with green laser for extra good visibility when measuring at long distances under strong indoor light. Suitable for documentation, calculation of material consumption, room and wall surfaces as well as placement and assembly of components, which makes it perfect for architects, electricians and many other professional groups. Robust design with shock-absorbing rubber casing, withstands a fall of 1.5 meters. Provides feedback in the form of both sound and vibration to signal that a measurement has been made. Illuminated display. Bluetooth compatibility and via the Bosch MeasureOn app provide quick documentation and transfer of measurement results. Powered by two 1.5V AA batteries. 1/4" tripod thread.
Laser class: 2.
Protection class: IP65.
Standard equipment: 2 pcs 1, 5V AA battery, carrying strap and soft storage bag.

Robust distance meter with a range of up to 50 m. Engineered to withstand inevitable drops from 2 m. Linear meter reading, calculation of area and volume. You can add or remove measurements and calculate distances. The user can choose continuous measurement for layout work. The Pythagorean height function allows measuring distances even when point A and/or point B is not available for linear measurement. Saves the last 5 measurements. Large raised buttons for easy handling. Backlit 2 line display. IP65 rated. Powered by 2 x 1.5 V AAA batteries.
Standard equipment: 2 x 1.5 V AAA batteries and belt pocket.

Small and flexible laser distance meter with a range of up to 30 meters. Quickly and easily measures length, can be used to calculate volume, area and the Pythagorean theorem. Measures both metric and imperial. Covered in rubber to increase durability and longevity. Simple operation with two buttons for flexibility and ease of use. Area, volume and Pythagorean calculations for a variety of uses. Backlit screen that turns off automatically after 20 seconds of inactivity. If the meter is not used for 180 s, it switches off automatically. Powered by 2 x 1.5V AAA batteries.
Standard equipment: 2 x 1.5V AAA batteries and wrist strap.

Small and compact rangefinder that easily fits in your pocket. For quick distance and area measurements. Dust and splash water protected. Illuminated display. Automatic shutdown. With Integrated Bluetooth Smart and the free Leica DISTO sketch app, you get unlimited possibilities to draw sketches, make floor plans and document your measurements with pictures using a Smartphone or a tablet. Detachable pocket clip.
Laser class: 2
Protection class: IP54
Standard equipment: Holster, pocket clip, 2 AAA batteries and manual.

Plastic bath and pool thermometer with red scale and orange floating ball. Length 270 mm. 
Measuring range: -5°C to +60°C.

Fully automatic 12 V "plug and forget" type charger and includes seven charging steps and the option to select programs for 0.8 A or 3.8 A. "Snowflake mode" uses the program for 3.8 A. A wide range of charging for all types of lead batteries from 1.2 Ah up to 80 Ah with additional maintenance up to 130 Ah. Splash and dust resistant (IP65). Easy and safe to use, protects the vehicle electronics, is spark-free, offers protection against connection with the wrong polarity and is short-circuit proof.

Battery charger with built-in automatic temperature compensation that offers unbeatable performance for lead-acid batteries from 1.2 Ah up to 110 Ah. Offers battery health monitoring to check if it can charge and can maintain charge, a patented automatic desulphation step and a special reconditioning step to recover and restore deeply discharged and stratified batteries. The AGM option is perfect for maximizing the performance and life of most stop-start batteries. The built-in temperature compensation ensures the best charging performance even in extreme conditions. The patented Float/Pulse maintenance function makes the battery charger ideal for long-term maintenance. The RECOND and AGM options work independently or together in both the SMALL BATTERY program and the NORMAL BATTERY program to offer the user flexibility. Splash and dust resistant (IP65). The battery charger is easy and safe to use, protects the vehicle electronics, is spark-free, offers protection against connection with the wrong polarity and is short-circuit proof. Comes with a 5-year warranty.

Convenient automatic battery and maintenance charger for 6 V and 12 V lead-acid batteries and 12 V Li-Ion batteries. Designed to charge car, motorhome, motorcycle, quad, snowmobile, jet ski, lawnmower, etc. Suitable as maintenance charger for car, boat and caravan. Monitors the battery for safe and efficient charging without overloading, and has a reconditioning mode that restores stratified and deeply discharged batteries.
Supplied with X-connect cables and battery clamps.

Masonry pencil with extra hard and break-resistant graphite lead. Perfect for marking concrete and stone materials, as well as other uneven surfaces. Made from PEFC-certified wood.

Bit with 1/4" bit holder. For square grooves. Material S2. Length 25 mm. SB pack.

Bit with 1/4" hex quick chuck attachment. For square grooves. Material S2. Length 90 mm. SB pack.

For internal hexagon holes. The special Hex-Plus shape means that approx. 20% greater torque can be transferred to the screw.

Bits specially designed to be used together with impact screwdrivers. Rough diamond coating prevents the bit from slipping out of the screw. With 1/4" hex socket.

Bits specially designed to be used together with impact screwdrivers. Rough diamond coating prevents the bit from slipping out of the screw. With 1/4" hex machine mount.

Colored bits with 1/4" bit holder. For Phillips slots. Length 25 mm. Material S2.

Bit with 1/4" bit holder. For Phillips slot. Material S2. Countersunk neck. Length 25 mm. Color marking for easier identification of size.

Bits with turned down neck. Diamond-coated chisel tip that increases service life and reduces the risk of chipping. For Phillip cross grooves according to American standard (shallower holes) - also fits European standard. Suitable for inserting plaster screws etc. With 1/4" hex socket.

With turned down neck. For American standard Phillip cross-grooves (shallower holes). Also fits in tracks according to European standards. Suitable for inserting plaster screws. With 1/4" hex socket.

Standard bits without torsion zone.
DIY-Box: Bits in practical plastic box.

Torsion bit. With a torsion zone that elastically takes up the high torques without damaging the tool.
Intended to be attached directly to screwdrivers with machine attachment 4.

Standard bits without torsion zone.
Intended to attach directly to screwdrivers with machine attachment 4.

Bits specially designed to be used together with impact screwdrivers. Rough diamond coating prevents the bit from slipping out of the screw. With 1/4" hex socket.

Bits specially designed to be used together with impact screwdrivers. Rough diamond coating prevents the bit from slipping out of the screw. With 1/4" hex machine mount.

Colored bits with 1/4" bit holder, for Pozidriv slots. Length 25 mm. Material S2.

Standard bit without torsion zone. With 1/4" hexagon socket.
DIY-Box: Bits in practical plastic box.

With 1/4" hex socket. Intended to be attached directly to screwdrivers with machine socket 4.
Torsion bits. With a torsion zone that elastically takes up the high torques without damaging the tool.

With 1/4" hexagon socket. Intended to be attached directly to screwdrivers with machine socket 4.
Standard bits without torsion zone.

Bits specially designed to be used together with impact screwdrivers. Rough diamond coating prevents the bit from slipping out of the screw. With 1/4" hex socket.

Bits specially designed to be used together with impact screwdrivers. Rough diamond coating prevents the bit from slipping out of the screw. With 1/4" hex machine mount.

Colored bits with 1/4" bit holder for straight grooves. Length 25 mm. Material S2.

BiTorsion. Bit torsion bit with a diamond-coated chisel tip that increases the service life and reduces the risk of chipping and that less pressure is required. Torsion zone with extra soft waist that elastically takes up the high torques without damaging the tool. With 1/4" hex socket.

Torsion bit. With a torsion zone that elastically takes up the high torques without damaging the tool. Suitable for pulling sheet metal screws.

Standard bit without torsion zone.

Bit with 1/4" bit holder. For Torx slots. Material S2. Length 25 mm. Color marking for easier identification of size. SB pack.

Impact bits with 1/4" hex quick chuck attachment, for Torx slots. Length: 50 mm. Specially adapted for striking machines such as impact screwdrivers. Material S2.

Torx bits. For internal hex tooth grooves acc. The Torx system. 1/4" hexagon socket.
DIY-Box: Bits in practical plastic box.

Torx bits with holes. For screws with center tip. For internal hexagonal grooves acc. The Torx system. With 1/4" hex socket.

Intended to be attached directly to screwdrivers. 1/4" hex socket.

Toughened Torx bit for universal use. With 1/4" machine bit attachment. SB pack.

Bits specially designed to be used together with impact screwdrivers. Rough diamond coating prevents the bit from slipping out of the screw. With 1/4" hex socket.

Bits specially designed to be used together with impact screwdrivers. Rough diamond coating prevents the bit from slipping out of the screw. With 1/4" hex machine mount.

Bit and socket wrench set in 38 parts. Hexagonal sockets with 1/4" square socket, made of chrome vanadium steel in Super-Lock design which increases the pulling power by 15% and reduces the risk of rounding. Sockets according to DIN 3124. Sockets for external Torx slots. Locking shaft and extension with 1/4" square socket. Color-coded bits with 1/4" bit holder. Bit holder with magnet and quick chuck. Supplied in a practical plastic box.

Industrial grade chrome vanadium steel. Matt chrome-plated. With hexagonal socket opening for 1/4" bit holder.

Bit holder for 1/4" bit with 1/4" hex quick chuck attachment.

Magnetic bit holder for 1/4" bits, with 1/4" hex quick chuck attachment.

Extra long bit holder for 1/4" hex bit, with strong magnet that holds the screw in place. For tight and difficult places that cannot be reached with conventional bit holders, with 1/4" hex quick chuck attachment.

Bit holder for 1/4" hex bit, with magnet and quick release function in the form of a button that pushes the bit out, with 1/4" hex quick chuck attachment. Available in two lengths.

Bit holder with reversible double bit tube. Quick change between different bits. Easy to turn even with gloves. Fits 25 mm bits.
Supplied with 1 bit holder, 1 bit tube and 2 bits (TX20 and TX25).

Universal bit holder with magnet and quick-change chuck Rapidaptor. With 1/4" machine bit attachment.

Bit holder with quick-change chuck. The hexagonal opening can be widened via a clamping sleeve, which makes changing bits easier. With hexagonal socket opening for the adaptation of bits with a hexagon socket. With 1/4" machine bit attachment.

Universal bit holder with spring ring and strong permanent magnet that holds the bit in place. Stainless steel sleeve for extra corrosion protection. With 1/4" machine bit attachment.

Bit holder made of special steel for extreme impulse peaks. With stop ring and magnet so that the bit sits securely in the holder. Special torsion effect through double torsion spring. Especially suitable for use with impact screwdrivers. 1/4" hex machine mount.

Bit holder made of special steel for extreme impulse peaks. With stop ring so that the bit sits securely in the holder, as well as a ring magnet to hold long and heavy screws in place. Special torsion effect through double torsion spring. Particularly suitable for use with impact screwdrivers. 1/4" hex machine mount.

Biting mat with 10 parts. Color coded 25mm bits with 1/4" bit holder. With practical carabiner for hanging.

Bit mat made of rubber with metal belt clip. 22 parts. contains bits with 1/4" bit holder, bit holder and drill. Material bit: S2

Bit mat made of rubber with metal belt clip. 24 parts. Contains bits with 1/4" bit attachment, bit holder, magnetic sleeves and sleeve adapter. Material bits: S2

Bit set in 54 parts with 2 bit holders. Bits with sandblasted surface in S2 high alloy steel. The Torx bits in the kit are colour-coded. Supplied in a practical plastic box.
1/4" bracket according to DIN 3126-C6.3, ISO 1173.

31-piece bit set with 1/4" socket. Robust and durable bits for universal use, made of high-quality steel alloy. 29 pcs short bits for slotted, Phillips, Pozidriv, Torx and Allen screws. Magnetic bit holder with quick release function. 1/4 " ball type socket adapter, for sockets with 1/4" square mount. Small and compact box with belt clip.

Bitssett med 1/4" bitsholder. Inneholder 31 deler, 30 bits og 1 bitsholder. Materiale i bits: S2.

Bit set in 32 parts. Color-coded bits with 1/4" bit holder. Length: 25 mm. Bit holder with magnet and quick chuck. Supplied in a practical plastic box.

Bit set in 53 parts in plastic box. 30 short bits 25 mm, 22 long bits 75 mm and 1 bit holder with 1/4" quick chuck.
Materials in bits: S2.

Bit set in 70 parts. Bit with 1/4" bit holder, Length: 25 mm. Bit holder 60 mm with magnet and quick chuck and bit holder/extender 100 mm. Supplied in a practical plastic box.

Bit set in 36 parts, with bit, bit holder and magnetic sleeves. Made of S2 steel with optimized heat treatment that provides extra durability. Extended torsion zone provides extra strength. For use with drill drivers and impact drivers.

Bit set with 1/4" bit holder containing 32 parts. Supplied in a practical plastic box with belt clip.
Material bits: S2
Length: 25 mm

With 1 Impaktor bit holder with stop ring and ring magnet in the bracket and 9 short bits 25 mm, specially designed to be used together with impact screwdrivers. Rough diamond coating prevents the bit from slipping out of the screw. Up to 5 times longer service life compared to standard bits or Torsion bits, depending on which bit tip is used.

Bit set in 12 parts. 11 durable bits. Stainless steel universal bit holder with locking ring and strong magnet. Supplied in a practical plastic cassette.

Bit set in 30 parts. 29 durable bits. Stainless steel universal bit holder with locking ring and strong magnet. Supplied in a practical plastic cassette.

A practical soft set made of canvas fabric. Folded and fastened with Velcro. Belt and suspension loop. Contains a bit holder in the form of a screwdriver handle type Kraftform with quick-change chuck and 16 pieces of 89 mm long bits.

Bit chisel including 4 bits. Chisels and bits are made of chrome vanadium steel. Grippy rubber handle.
Bits: Groove 5.0, Groove 7.0, PH1, PH2.

Ratchet screwdriver for bits. Locking function for right and left pulling as well as locked position (no locking function). Rotatable handle, lockable at 30° angle and 180° for normal pulling. Magnetic holder and knurled finger grip on the blade for quick draw. Magazine in the shaft with bits.
Bits: PH1, PH2, PZ1, PZ2, grooves 4.5 and 5.5.

Bit locking screwdriver with T-handle. Bit magazine in the handle with 6 hex bits with ball.
Bits: 2, 2.5, 3, 4, 5, 6 mm.

Bit locking screwdriver with T-handle. Bit magazine in the handle with 6 Torx bits with ball.
Bits: TX10, TX15, TX20, TX25, TX30, TX40.

Bit locking screwdriver with bit magazine in the handle, with 12 bits.
Bits: PH1, PH2, PH3, PZ1, PZ2, PZ3, TX10, TX15, TX20, TX25, TX30, SL 5.5mm.

Blind rivet nut pliers for attaching rivet nuts M4-M8. With replaceable nozzles for rivet nuts M4, M5, M6 and M8. Made in a durable and robust design with plastic-covered legs.

Blind rivet nut pliers set for attaching rivet nuts M4-M8. With replaceable nozzles for rivet nuts M4, M5, M6 and M8. Made in a durable and robust design with plastic-covered legs. Delivered together with associated rivets in a hard plastic bag.
Contents:
Blind rivet nut pliers 1 pc
Rivet nut M4 10 pc
Rivet nut M5 10 pc
Rivet nut M6 10 pc
Rivet nut M8 10 pcs

Compact and efficient blind rivet gun 12 V Li-Ion. Holds up to 325 4.8 mm stainless steel rivets on one charge (2.0 Ah battery). Handles aluminum, steel, stainless steel and copper rivets from 2.4-4.8 mm. Nozzle that holds the rivet before installation. Built-in storage for spare nozzles. Battery indicator. LED lighting. Belt holder. Integrated chip collector.
Standard equipment: 1 pc 2.0 Ah battery, charger, 4 pcs nozzles (2.4, 3.2, 4.0 and 4.8 mm) and stackable HD- box.

Blind rivet pliers for use in sheet metal, construction, construction and maintenance work. Locking mechanism that retains the rivet in the pliers during installation. Supplied with 4 nozzles (for rivets 2.4, 3.2, 4.0 and 4.8 mm).

Blind riveter with rotatable head (360°) for better access. Adjustable at any angle. For use in sheet metal, construction, construction and maintenance work. Locking mechanism that retains the rivet in the pliers during assembly. Supplied with 4 nozzles (for rivets 2.4, 3.2, 4.0 and 4.8 mm).

Blind rivet pliers BT715 with blind rivet assortment. Supplied in a practical metal box.
Contents:
Rivet 2.4x6 mm 20 pcs
Rivet 3.2x8 mm 20 pcs
Rivet 4.0x8 mm 20 pcs< br>Rivet 4.8x8 mm 20 pcs
Rivet washers 20 pcs

Ergonomic hand steel brush, specially adapted for cleaning brake calipers. Rubber covered handle. Brush height 23 mm.

Breaker blade with interruptible edges. 10-pack.

Breaker blade in standard design. Supplied in a practical plastic case.

Breaker blades with extra long service life, up to 25% longer compared to breaker blades in standard design. Supplied in a practical plastic case.

Knife blade that lasts 5 times longer than a normal knife blade. Extremely hard blade while maintaining flexibility. The Tungsten Carbide blade has a hardness value of 9 on the Mohs scale. Common knife steels have a hardness of 6.5.

Cutting blade for fine and precise cutting. Perfect for working with paper, film or other thin material. A razor sharp angled blade that provides an exceptionally smooth and fine quality of cut. Made from steel to provide a strong core which provides a more accurate tool and a sharpened blade. The breaker blades are hardened to maximize blade strength and to increase lifespan. The blades are manufactured with an optimized grinding technique to provide the best cutting performance.

Plastic handle with rubber inserts for a secure grip. The blade locks automatically with a latch. Comes with 1 blade with 12 breakable edges.

Break blade knife made of durable PP plastic. Designed for quick and easy blade change without tools. The blade is fixed in fixed positions when it is fed forward. Built-in blade switch in the back of the knife for safe interruption of the blade. 1 sheet included.

Robust, slim folding blade knife for precision cuts such as for cutting shapes in paper or opening boxes. The angled top serves as a benchmark for 45 and 90 degrees. Symmetrical design for both right- and left-handed use. With a function that locks the blade in fixed positions. Easy to attach to pocket or toolbox. The removable clip can also be used to safely break blades. Made of durable polycarbonate plastic with a steel core for extra stability.

Ergonomic folding blade knife with rubber grip. Suitable for all-round use such as cutting plaster, insulation, wet room boards and wood. Space for a magazine with 3 extra sheets. The angled top serves as a benchmark for 45 and 90 degrees. Symmetrical design for both right and left handed use. Advancing the blade via either wheel lock or auto lock function. Made of durable polycarbonate plastic with a steel core for extra stability.

Break blade knife with blade width 9 mm. Blade breaker in the handle for safe breaking. Multi-position push button for quick and easy use. Molded two-piece handle for quick blade changes.

Break blade knife with blade width 18 mm. Blade breaker in the handle for safe breaking. Multi-position push button for quick and easy use. Molded two-piece handle for quick blade changes.

Break blade knife in plastic with 8 blades and induction treated edge. Removable blade breaker for quick and safe breaking of old blades. Soft two-component handle. Stainless steel container for 6 blades.

Break blade knife with rubber grip, Profine. Knife for opening cartons at the back edge and heel for opening cans. Including 1 cutting blade. Blade width 18 mm.

Set of two plastic cutting blades with a width of 9 mm and 18 mm. Multi-position push button for quick and easy use. Blade switch in the handle for increased safety. Two-piece molded housing simplifies for a quick blade change.

Made of square special alloy aluminium, strong as steel but much lighter. Flat break lever at each end.

Pickaxe made of 6-sided quality steel. Wide and thin chisel facilitates access in tight spaces. Long conical tip is used e.g. to match flange with bolt hole. The cone facilitates the installation of O-rings. Unpainted cone to avoid discoloration.

Flexible crowbar adjustable in 11 positions. Easily adjusted with a button. Suitable for e.g. fitting doors and windows, or for pulling out nails, removing thresholds and all kinds of renovation work. Max load 240 kg.

Flexible crowbar that can be used to scrape, break and lift with, as well as designed for nail extraction.

A small useful steel crowbar that can be used to pull out small nails, moldings or to open cans. Has three different nail extraction functions. Thin installation surfaces that make it easy to access.

Crowbar of octagonal special alloy steel. Fully hardened and tempered. Finely ground, polished and clear lacquered work surfaces. Painted red.

Simple joint. Serrated jaws. Polished head.

Forged in precision-hardened steel, black-oxidized and rust-protected. Lacquered handles. Adjustable jaws. Cutting capacity up to 19mm rebar or 9mm valve spring steel. Good accessibility even in tight spaces.

Bolt cutter forged in hardened chrome-molybdenum steel with hardness HRC 56-62. Adjustable jaws. Lacquered legs with rubber handles.
The cutting capacity refers to Medium hard metals HRC 40° / Soft metals HRC 15°.

Hardened blades with precision grinding, cut evenly and precisely, good access to the workpiece due to the flat head, two-color two-component handle. They have exchangeable cutting heads, which can be precisely adjusted in twelve different positions. The bolt shears are made of chrome-plated vanadium steel HRC 48.

Bench vise made of steel with replaceable jaws. Hardened and tempered jaws made of alloy steel. Equipped with anvil, molded grading and large anvil plate. Adjustable alignment between body and guide shoe. A rotatable base plate is available as an accessory to purchase.

Countersunk bench vise made of steel. With big cleaning. Ground, fully encapsulated spindle with double trapezoid thread. The slide is replaceable - does not apply to 100 mm. The dimensions 120-180 mm are provided with a sleeve under the jaws for quick assembly of folding jaws.

Robust bench vise in cast iron construction. Nickel-plated grips for extra corrosion resistance. The base can be turned and locked in the desired position. The base plate is screwed directly into the workbench for stability. Roll-shaped threads for smooth operation and durability.
Pressure force: 1100 kg.

Hacksaw stand with easy-to-grip handle. Aluminum scaffolding. Can also be used with angled blade, fixed clamping angles 45° and 90°. Comes with a bi-metal hacksaw blade.

Hacksaw blade in bimetal, the largely unbreakable and splinter-free blade for all kinds of metal cutting. With a tough spring steel in the back and a hard, durable high-speed steel in the teeth, we can guarantee that the blade will retain its sharpness and durability for a very long time. Combines very high cutting properties with a high degree of flexibility that is significantly much better than any other high speed steel blade or other conventional flexible blade.

Fits mini bow files 218, 228 and 268.
For wood: 15 teeth/inch.
For metal: 32 teeth/inch.

Hacksaw handle with associated hacksaw blade in bi-metal. For sawing in hard-to-reach places. Supplied with a hacksaw blade.

Professional hacksaw for sawing in wood and other wood-based materials. The Force bow is very light, yet is a powerful saw with high blade tension that produces straight cuts. Ergonomically designed handle with soft and "warm" grip and with knuckle protection. The bow is made of high-quality steel and treated with rust protection.
Bow saw blade 51: For cutting both dry and fresh wood. Peg toothing.
Bow saw blade 23: For cutting fresh wood, plane toothed.

Saw blade for cutting both dry and fresh wood. Pin teeth. Made of hardened quality steel and with tip-hardened teeth. Should not be filed. Anti-rust treatment and individually packaged with informative text for correct use and blade selection.
Bow saw blade 51-12", 51-21", 51-24": Fine-toothed for sawing dry wood, branches and twigs.
Bow saw blade 51-30", 51-36": With normal breathing for felling trees, sawing wood etc.
Bow saw blade 59-30": Extra fine toothed.

Compact, easy-to-use and robust multi-purpose laser with up to four times better visibility thanks to green laser lines. High work efficiency thanks to 3x 360° lines simultaneously on horizontal and vertical leveling applications with a single tool. Self-leveling (±4° in 4 sec), highly accurate (± 0.2 mm/m) up to 120 m (diameter) range with receiver. High precision thanks to innovative CAL Guard monitoring and Bluetooth connection to your smartphone for remote control and contactless adjustment of the tool. Pendulum locking for safe movements. Can be used both with 12 V Li-Ion battery and with 4 pcs 1.5 V AA alkaline standard batteries. With 5/8" and 1/4" tripod thread.
Standard equipment: 1 pc 12 V, 2.0 Ah Li-Ion battery, charger, laser target, universal bracket BM1 and storage bag L-BOXX.

Self-leveling circle laser with green laser beam. Powered by 12 V Li-Ion battery. 3 pcs 360° self-leveling lines. Projects bright light in intersecting horizontal and vertical lines. Full pulse function can be used with detector. The detector maintains full brightness for high visibility. Multiple flashing sequences in manual mode. With tripod thread 1/4".
Standard equipment: 1 pc 2.0 Ah Li-Ion battery, charger, mounting bracket, target board, laser glasses and storage bag.

Compact, self-leveling circle laser with green laser beam. 3 pcs 360° self-leveling lines. Projects bright light in intersecting horizontal and vertical lines. Powered by 18 V Li-Ion battery. Has a range of up to 40 m (without receiver) and up to 100 m (with receiver). Suitable, for example, for pipe penetration, installation of electricity, carpentry and plaster wall construction. Stand thread 1/4" and 5/8". Rotatable wall mount with magnet. 
Standard equipment: Rotatable wall mount. 
Supplied without battery and charger.

Robust and durable multi-line laser with extra high visibility thanks to powerful green laser diodes. Projects one horizontal and two vertical 360° clear and distinct laser lines. Range of up to 35 m without receiver and up to 70 m with receiver. Self-leveling over large working area, visual alarm if the slope is outside the limit (± 4°). Laser lines with adjustable strength in three steps (100%, 75% and 50%). The vertical laser lines projected onto walls and ceilings are easy to adjust after the plumb point is set. The integrated base allows you to position the cross-section (plumb) of the two vertical laser lines where it is needed and then adjust the laser lines by ± 10° while the plumb point remains in place. Dust and splash water protected. 1/4" tripod thread. Powered by 3.6 V Li-Ion battery pack but can also be used with 3 pcs 1.5 V AA batteries or with mains cable. Receiver RGR 200 is available as an accessory.
Standard equipment : 1 pc 3.6 V 5.2 Ah battery, charger with mains cable, battery holder, magnetic adapter Twist 250, wall bracket UAL 130, target board, manual and storage bag.

Robust and durable multi-line laser with extra high visibility thanks to green laser lines. Projecting one horizontal and two vertical 360° clear and distinct laser lines, for easy weighing, marking out right angles and transfers. Range of up to 38 m without receiver and up to 50 m with receiver. Self-leveling up to 4° deviation with warning when the laser is out of tolerances. Manual mode for use with angling. Integrated magnetic attachment. Bracket that also provides 330° rotation with fine adjustment. Powered by M12 Li-Ion battery that provides an operating time for a full working day with an M12 4.0 Ah battery. 1/4" and 5/8" tripod thread. Shockproof, withstands drops from 1 m. Protection class IP54.
Standard equipment: 1 pc 4.0 Ah Li-Ion battery, charger, target board, roof bracket and storage bag.

White nylon. Plastic handle with hanging hole. Brush height 23 mm.

Round cast steel wire 0.35 mm. Plastic handle with hanging hole. Brush height 23 mm.

Diamond drill set in 4 parts with drill bits for dry drilling in tiles and natural stone. Used together with an angle grinder.
Drill attachment: M14
Max speed: 12000 rpm.
Rec. speed: 11000 rpm.

Digital multimeter that measures current, voltage and resistance. Used to perform measurements on circuits directly connected to a low voltage installation. Such as household appliances, hand tools, etc. 3 1/2" LCD display. Self-polarizing.
Operating temperature indoors: 5-40° C, max 80% humidity.
Power consumption: 18 mW.
Current consumption: 2 mA.
DC voltage: 200 mV - 250 V, ± 0.8%.
DC current strength : 200 µA - 2 A, ± 1.2%.
AC Voltage: 200 V - 250 V, ± 1.2%.
Resistance : 200 - 2000 k, ± 2%.
Size: 150 x 70 x 24 mm.
Weight: 150 g.

Digital thermometer with dual display. Measures the highest and lowest indoor and outdoor temperature. Brushed aluminum metal front. Mountable on wall. Powered by 1 x 1.5 V battery (not included). 
Measuring range (indoor/outdoor): -10°C to +40°C / -50°C to +60 °C.

Digital thermometer with 2 displays. Shows indoor and outdoor temperatures. Loose sensor for outdoor placement. Mountable on wall. Battery 1 pc 1.5 volt R6, included. 
Measuring range (indoor/outdoor): -10°C to +40°C / -50°C to +60°C.

Wireless indoor and outdoor thermometer with min/max and clock. Memory for min and max temperature. For wall mounting or table placement. Range (open field) max 80 meters. Powered by 4 LR03/AAA batteries (not included). 
Measuring range (inside/outside): -10°C to +50°C / -50°C to +70° C.

Protractor for measuring and transferring angles. Manual on and off button and automatic switch-off after 5 min. Zero setting. ABS function, with memory for the last measurement and for the zero point set by the user. Powered by 1 pc CR2032 battery (included).
Measuring range: 0-360°.
Repetition accuracy: 0.1°.
Leg measurement: 230 mm.

Digital calipers in stainless steel. Large LCD screen. Adjustable from mm to inches. On and off button and reset function. With flat depth gauge. Monoblock profile provides reduced friction and increased service life. Powered by 1 LR44 battery (included). Supplied in a robust plastic box.
Resolution: 0.01 mm.

Electronic caliper made of hardened stainless steel. With locking screw and shut-off button, switchable between mm and English inches and zero setting button. Large LCD screen. Depth gauge and pointed measuring legs for internal measurement. Supplied in case.
Accuracy: According to DIN 862

Digital caliper made of hardened stainless steel. Caliper with locking screw and shut-off button, switchable between mm and English inches and zero setting button. Depth gauge and pointed measuring legs for internal measurement. With large LCD display with metal casing. Supplied in case.
Accuracy: According to DIN 862.

(HTML text not available)

(HTML text not available)

Depth marker with 2.8 mm thick graphite pin as standard. The tip is 40 mm long, you can easily get through brackets for e.g. screw holes. Also suitable as a replacement for the carpenter's pencil. Triangular shape means that it does not roll away. For marking on most surfaces/materials, e.g. smooth surfaces such as tiles, tiles and glass etc. Also adheres to dirty and oily surfaces. The pin is fed forward easily with a simple thumb grip. The sleeve is equipped with a reinforced belt clip for easy storage in trousers or a tool pocket. Pencil sharpener at the end of the pencil which is attached with a bayonet socket. Comes with a graphite pencil.
Spare pencil:
Dry Graphite: Hardness level 2B, a little softer than a standard hard carpenter's pencil, and thus adheres better to more surfaces. Wipeable.
Dry Graphite H: Graphite pencils especially suitable for marking wood and slightly harder than standard Graphite 2B pencils. Wipeable.
Dry Basic: Water-soluble stick that is easily wiped off. Yellow pen is excellent for marking on dark surfaces. Yellow and red pin also adheres to dirty and oily surfaces but are sensitive to heat as they can become soft.
Dry Special: Permanent pin, so-called water jet resistant, withstands high water pressure, e.g. when cut in stone and tile.

Depth marker for professionals. Longlife pen for marking in deep holes. With 2.8 mm thick graphite pin as standard. The tip is 45 mm long, you can easily get through brackets for e.g. screw holes. Also suitable as a replacement for the carpenter's pen. For marking on most surfaces/materials, e.g. smooth surfaces such as tiles, tiles and glass etc. Also adheres to dirty and oily surfaces. The pin is easily fed forward with a click feed via the stainless steel tube. Robust sleeve equipped with belt clip for easy storage in trousers or tool pocket. Pencil sharpener in the sleeve positioned for easy access, the sleeve does not need to be removed from the belt or pocket to sharpen the pencil. Supplied as standard with a graphite pencil.
Reserve pencil:
Dry Graphite: Hardness level 2B, a little softer than a standard hard carpenter's pencil, and thus adheres better to more surfaces. Wipeable.
Dry Graphite H: Graphite pencils especially suitable for marking on wood and slightly harder than standard Graphite 2B pencils. Wipeable.
Dry Basic: Water-soluble stick that is easily wiped off. Yellow pen is excellent for marking on dark surfaces. Yellow and red pin also adheres to dirty and oily surfaces but are sensitive to heat as they can become soft.
Dry Special: Permanent pin, so-called water jet resistant, can withstand high water pressure, e.g. when cut in stone and tile.

Marker pen for marking in narrow and deep holes. Extra long tip (35mm) in stainless steel and with a Ø 1.5 mm so that you can easily get through brackets for e.g. screw holes. Triangular shape means that it does not roll away. Pen body entirely in plastic, which means that it does not conduct electricity. For permanent marking on all dry surfaces/materials. Contains 2.4 ml of ink and writes about 500 meters. The sleeve is equipped with a reinforced belt clip for easy storage in trousers or a tool pocket. The ink can be removed with alcohol or similar, if necessary.

Used in concrete work and when sealing sacks. Spindle diameter 8 mm.

Octagonal lacquered shaft. Polished tip. Specially hardened, impact-resistant skull.

Set of cylindrical drive mandrels with 8-sided grip, made of chrome-molybdenum steel - matt finish/lacquered. Plastic holder that can be placed upright.

Made of induction-hardened special steel. Polished design. Extra long. Octagonal shaft.

Screwdriver complete with one-way bit and support collar for unscrewing one-way screws. Multibits for unscrewing most types of damaged screw heads. The bits are replaceable.

Folding rod with single link. There are two models, with straight 180° or curved 45° jaws. Black with plastic covered legs.

Bevel scissors with gears. Induction hardened HRC 60-62. Two-component handle with suspension loop. With return spring and locking plate.
Cutting capacity: Steel 1.2 mm or stainless steel 0.7 mm

Bevel scissors with short blades. With exchange. Induction hardened HRC 58-60. Two-component handle with suspension loop. With return spring and locking plate.
Cutting capacity: Steel 1.6 mm or stainless steel 1.2 mm.

Bevel scissors with gears, angled blade keeps the hand above the material. Induction hardened HRC 60-62. Multi-function - cuts right/left/straight. Powerful model, long blades. Two-component handle with suspension loop. With return spring and locking plate.
Cutting capacity: Steel 0.9 mm or stainless steel 0.5 mm.

Bevel scissors angled with gear. Induction hardened HRC 60-62. The angle keeps the hand above the material. Two-component handle with suspension loop. With return spring and locking plate.
Cutting capacity: Steel 1.2 mm and stainless steel 0.7 mm.

For 45° chamfering of plasterboard. Adjustable depth 1-3 mm. Handles thickness up to 15 mm. 18 mm breaker blade.

Pocket spirit level with magnet, in aluminum profile with end protection. Light weight, only 80 g.
Tolerance: ± 0.5 mm/m

Small and handy pocket spirit level equipped with optivision. Strong, durable and compact pocket level. Made of wear-resistant brushed aluminum and impact-resistant rubber. Equipped with a magnet at the bottom. UV resistant. The spirit level has a high contrast ratio between bubble and liquid for a fast and accurate reading. Belt holder with magnet. Weight 173 g. Width 28 mm, height 53 mm, length 100 mm.
Tolerance: + 0.5 mm/m

Spare blade for jigsaw 301. Made of hardened carbon steel, 14 teeth/inch.

PH = plastic shaft. FH = ergonomic rubber handle.

With foam plastic felt glued to plastic plate with plastic handle.

With foam rubber felt and plastic handle.

Type Micro. For straight tracks. Round blade with "Black-Point" marked chisel point. Concave roller top. Hexagonal lying surface that prevents the chisel from rolling on the work table.
Ergonomically designed handle with two-component zone.

Fine mechanic chisel set with 6 in 1 function. Consisting of 1 mini screwdriver and 3 double-bits; PH 0, 0.1, 1 and FD 2.0, 2.4, 3.0.

Fine mechanic's chisel set consisting of 7 chisels for straight grooves and Philip grooves.

Fine mechanic's chisel set consisting of 7 chisels for Torx slots.

Fine mechanic's chisel set in 6 parts. 4 hex screwdrivers with ball (1.5, 2.0, 2.5, 3.0 mm) and two without ball (0.9, 1.3 mm). Kraftform Micro screwdrivers with round blade and Black Point tip that provide precise fit and optimized corrosion protection. Ergonomically designed handle with two-component zone. By supporting the hand on the rotating top and thanks to the quick rotation zone under the top, it is possible to spin the screwdriver at lightning speed without having to rework. Hexagonal lying surface that prevents the chisel from rolling on the work table. Supplied in a storage rack. 

Flat nose pliers with single joint. Long, straight jaws. Grooved grip surface. Polished. Plastic covered legs.

Flat chisel with specially hardened, impact-resistant skull. Made of special steel. Polished design.

Multi-purpose pliers 8", 200 mm. With slim design for ease of use. Smooth gripping surface at the front of the jaws for a soft grip on the material and knurled gripping surface to provide a better grip. Straight outside for deburring and widening holes. Hidden spring system. Made of steel .Handle made of two-component material.Shrinks 0.5-2.5 mm².For cutting ø15/50 mm².

Made of square special alloy aluminium, strong as steel but much lighter. Round, ground tip at one end - flat breaking lever at the other.

Versatile and powerful outdoor knife with friction grip. The blade is made of 3.0 mm Japanese knife steel. Egg with Scandinavian sharpening for best sharpness and which is perfect for sharpening/sharpening. Electrophoretic surface treatment (EPD) reduces the risk of rust. Ground spine on the blade intended for use with flint steel. Laser engraved measurement scale on the blade. Shaft made of extra impact-resistant PP plastic with Santoprene friction grip. Heavy duty fabric holster allows up to 80mm wide belt and has a pocket for storing lighter steel. The fabric holster is also removable if you want to attach the holster to the button in work clothes.

Blasted ax skull that has been clear lacquered before mounting the hickory handle. Shank with both wooden and metal wedge. Drilled suspension hole.

(HTML text not available)

Robust folding knife in lacquered aluminium, with stainless details and lacquered blade in stainless knife steel. Compact design and with a large area of ??use. The knife blade is 2.8 mm thick, hardened to 58-60 HRC. Easy and safe locking of the blade with a button on the side of the handle. The belt clip is reversible and can be mounted on both sides of the handle. Can be used together with Hultafors ignition steel.

Folding knife with a compact size that can be easily stored in the pocket. Grindable knife blade in stainless steel. Push button makes it possible to smoothly open the knife with one hand. Straight tip that enables easy and even cuts. Lock function that locks the blade in the unfolded position. Practical loop for hanging. Belt clip with rounded edges that do not damage the pockets.

Folding knife with corrosion-resistant D2 steel. High strength and wear resistance that keeps sharpness longer. Knife blade blade with insert tip. Push button for 2-hand opening. Locking mechanism in steel that ensures that the blade stays in place when it is unfolded. Handle in fiberglass nylon reinforced with stainless steel. Practical loop for hanging. Reversible belt clip for right- and left-handers.

Pocket knife with retractable blade. Made of black lacquered light metal. Simple spring mechanism locks the blade in the extended position. Supplied with two blades. Magazine in the handle.

Multi-scraper with ergonomically designed two-component handle for better grip. With replaceable carbide blades that stay sharp up to 50 times longer than conventional steel blades. Can be used on all materials and substrates. Supplied with triangular shaped blade 25 mm and holster for storage in pocket or on belt. Three additional cutting profiles are available as an option: round, teardrop and pear-shaped

Universal scraper with ergonomically designed two-component handle for better grip. With replaceable carbide blade that stays sharp up to 50 times longer than conventional steel blades. Can be used on all materials and substrates. Supplied with 50 mm insert but also suitable for 65 mm insert.

Two-handed paint scraper with ergonomically designed handle in two-component plastic material for better grip. With replaceable carbide blade that stays sharp up to 50 times longer than conventional steel blades. Can be used on all materials and substrates. Supplied with 65 mm insert but also suitable for 50 mm insert.

Extension rod with square peg for sockets. With fixed locking, ball and hexagon bracket. Industrial grade chrome vanadium steel. Matt chrome-plated. According to DIN 3123.

Enlargement pin for power sockets. Industrial grade chrome-molybdenum steel.
Mount indicates inside to outside square.

Enlargement spigot for sockets. With hole for turning with extension rod. Bracket indicates inside to outside square. Industrial grade chrome vanadium steel. Matt chrome-plated. According to DIN 3123.

Hard plastic miter box with fixed saw angles at 45° and 90°. Length: 290 mm. Width: 90 mm. Height: 55 mm.

Miter saw with cast aluminum table. The table is marked with a length scale and angle scale. Fixed saw angles at 22.5, 30, 36, 45 and 90°. Hard plastic handle. Supplied with 2 saw blades, 1 14 TPT for wood and 1 24 TPT for soft metals.
Saw blade length: 560 mm.
Max cutting height: 120 mm.
Table length: 350 mm.

Adjustable angle hook where the blade can be fixed at 45°, 90° or 135° with a simple hand grip. Stop in anodized aluminum and the blade in stainless steel. Length of stop 162 mm. Graduated on both sides.

Adjustable plaster angle with millimeter and degree graduations that can be set in four fixed positions 22.5°, 45°, 67.5° and 90°. Another 21 angles are marked on the scale. Stops and blades can be folded. The stop can be turned between right and left position. Stop and blade in anodised aluminium.

Foldable plaster angle that can be adjusted to the desired angle. Anodized aluminum. End protection in ABS and strong locking screw. Clear scale in cm/inch.
Tolerance: ± 3 mm/1200 mm, ± 0.15°/1200 mm.

Plaster saw with double-ground coarse teeth with 7 tpi for fast cutting on pulling and pushing. With a sharpened tip so that the saw can easily be pushed through the plaster. Strong blade with a thickness of 1.2 mm. Ergonomic elastomer handle. Blade length 165 mm.

Glass cutter with tungsten blade. Plastic handle.

Glass cutter with wooden handle. 6 replaceable carbide pulleys for cutting glass, ceramics, tiles. For glass thickness 3-8 mm.

Grade knife made of HSS steel suitable for most makes. 10-pack.
Supplied without handle.

Digital grill thermometer that gives extra fast measurement results. Water resistant. Not for oven or microwave, only the stainless steel spear can withstand high heat. Powered by 1 pc LR1130 battery (included).
Measuring range: -0°C to +300°C.

Bendable and flexible gripping tool with both magnet and gripping claw.

Made of solid, black rubber. Normal hardness. Wooden handle.

Type Thorub. Made of solid, black rubber. Normal hardness (75° shore). Ash shaft.

For aligning hinges, galvanized.
NR 1 - For window and door hinges.
NR 2 - For garage and factory doors.
NR 3 - For smaller door and window hinges.

Use:
For filing concave and flat surfaces as well as larger holes.
Suitable for deburring work.
Design:
Tapered shape, double degree.
Chopping:
The penultimate number in the model designation indicates the chopping,
1 = Coarse, 2 = Medium, 3 = Fine.

Oval bracket. Of hickory or ash. Without wedge. The dimensions of the eye are directly adapted for "Hultafors" hammers and chisel hammers.

Slagtåligt skyddshandtag i hårdplast. Passar Flatmejslar.

Mini-Professional saw for sawing in many different types of materials, such as aluminium, plastic, laminate and wood. Tooth tip hardened, should not be filed. Very fine-toothed/straight-toothed, tip-hardened, should not be filed. Screwed plastic handle.

Hand saw for cutting wood and laminate floors.
Fine XT teeth, 11 tdr/inch. Tooth tip hardened, should not be filed. The shape and thickness of the blade provide good stability and straighter sawing. Unique surface treatment, which reduces friction and prevents rust attack. Comfortable screwed two-component angle handle. The handle is placed low on the blade, which distributes the force along the teeth.

Hand saw with ergonomic, high-strength 3-component ABS handle. Strong blade guard with quick lock and hanging hole. Serration with 3-phase grinding combines efficient felling with straight cuts without chipping. Saw blade with environmentally friendly surface coating with wax that provides low friction, low vibration, protection against rust and minimizes the risk of the saw pinching. Handle and saw blade are mounted with stable safety screws that enable easy replacement of saw blade. Narrow tip facilitates access in tight spaces and when starting in the middle of a disc.

Hand saw suitable for sawing in a variety of materials, e.g. timber, chipboard and fence posts. Double ground teeth and induction hardened blade for long life. Grip-friendly handle with rubber coating. The blade and handle are welded together for increased strength in the blade and handle. Blade thickness of 0.85 mm which reduces the risk of the blade wobble. Handle with 45° and 90° angle.

Wheel sleeve kit 1/2" with outer and inner plastic coating to minimize the risk of damage to rims and wheel nuts. 3 sleeves in sizes 17mm (blue), 19mm (yellow) and 21mm (red). Length 85mm.

Wheel nut socket set 1/2" with external protection for rims and internal protection for dome nuts. Industrial quality of chrome vanadium steel. Supplied in impact resistant hard plastic case (146x132 mm).

Hoof pliers made of black-oxidized and rust-protected chrome vanadium steel. Induction-hardened edges tempered to a special hardness to withstand the large breaking stresses that occur during nail extraction and similar work. Plastic-dipped legs.
The cutting capacity refers to steel wire 1800 N/mm².

Hoof pliers made of hardened tool steel. Non-slip vinyl grips.

For lær m.m. Med bøyle. Blankpolert, konisk skjærehode. Rektangulært skaft. Lakkert.

For lær m.m. Blankpolert, konisk skjærehode. Rundt skaft. Lakkert.

Blasted ax skull that has been clear lacquered before mounting the hickory handle. Shank with both wooden and metal wedge. Drilled suspension hole. Protective plastic on the edge.

Hygrothermometer that shows current humidity and temperature. Also shows the highest and lowest quotation during the measurement period.

High-gloss nickel-plated and chrome-plated vanadium steel. With Dynamic Drive profile.

High-gloss nickel-plated and chrome-plated vanadium steel. With Dynamic Drive profile.

Socket 1/2" with hexagonal grip opening. Superlock design that increases the pulling power by 15% and reduces the risk of rounding. Industrial quality of chrome vanadium steel. High double finish with letter ring.
According to DIN 3124.

Long socket 1/2" with hexagonal grip opening. Superlock design which increases the pulling force by 15% and reduces the risk of rounding. Industrial quality of chrome vanadium steel. High double finish with letter ring. According to DIN 3124.

Socket 1/4" with hexagonal grip opening. Super-Lock design that increases the pulling force by 15% and reduces the risk of rounding. Industrial quality of chrome vanadium steel. High double finish with letter ring. According to DIN 3124.

Socket 3/8" with hexagonal grip opening. Super-Lock design that increases the pulling power by 15% and reduces the risk of rounding. Industrial grade chrome vanadium steel. High double finish with letter ring. According to DIN 3124.

Industrial grade chrome vanadium steel. For connecting sockets, with fixed locking and ball. With 1/4" hex quick chuck attachment.

Socket adapter set for ratchet combination wrench, with quick release button. Contains 3 parts: 1/4" socket bracket for 10mm wrench, 3/8" socket bracket for 13mm wrench, 1/2" socket bracket for 19mm wrench. Industrial grade chrome vanadium steel. Bright chrome plated and highly polished.

Socket wrench set 1/2" mm in 23 parts. Locking shaft (60 teeth) with recessed quick-release button. Hexagon sockets with Super-Lock design that increases the pulling force by 15% and reduces the risk of rounding. Industrial quality of chrome vanadium steel with high oil-repellent finish. U-tech finish.Supplied in impact-resistant hard plastic case (390x280x80 mm).

Socket wrench set 1/4" and 1/2" mm in 70 parts. Manufactured from industrial grade chrome vanadium steel. U-tech finish. Locking shaft (60 teeth) with recessed quick-release button. Contains ring lock keys. Hex sockets with Super-Lock design that increases traction by 15% and reduces the risk of rounding. Delivered in a bag made of impact-resistant hard plastic (390 x 280 mm).

Socket wrench set 1/4" and 1/2" mm in 72 parts. Manufactured from industrial grade chrome vanadium steel. U-tech finish. Locking shaft (60 teeth) with recessed quick-release button. Contains U-ring keys. Hex sockets with Super-Lock design that increases traction by 15% and reduces the risk of rounding. Delivered in a bag made of impact-resistant hard plastic (390 x 280 mm).

Socket wrench set 1/4" and 1/2" mm in 95 parts. Locking shaft (60 teeth) with recessed quick-release button. Hex sockets with Super-Lock design that increases traction by 15% and reduces the risk of rounding. Industrial grade chrome vanadium steel with high oil resistant finish. U-tech finish. Delivered in a bag made of impact-resistant hard plastic (540x360x90 mm).

Socket wrench set 1/4" in 12 parts. Sockets with Super-Lock design with double finish and letter ring. Ratchet shank 1/4" with U-Tech finish and extension rod 1/4" with square socket for sockets. With fixed ball and hexagon socket. Industrial quality of chrome vanadium steel.

Socket wrench set 1/4" in 29 parts. Locking shaft (60 teeth) with recessed quick-release button. Hexagon sockets with Super-Lock design that increases the pulling force by 15% and reduces the risk of rounding. U-tech finish. Socket wrench set in industrial quality of chrome vanadium steel with high oil-repellent finish.Supplied in impact-resistant hard plastic case (240x140x60 mm).

Bit and socket wrench set with 31 parts. Colored 1/4" bits and hexagon sockets with Super-Lock design which increases the pulling power by 15% and reduces the risk of rounding. Supplied in a practical plastic box.

Socket wrench set 3/8" mm in 61 parts. Locking shaft (60 teeth) with recessed quick-release button. Hexagonal sockets with Super-Lock design that increases the pulling power by 15% and reduces the risk of rounding. Industrial quality of chrome vanadium steel. U-tech finish. Supplied in bag made of impact-resistant hard plastic (390 x 280 mm).

Socket set 1/2" mm in 31 parts. Short (62 mm) and long (138 mm) hex, torx and twelve-tooth sockets. Made in industrial quality from chrome vanadium steel. U-tech finish. Supplied in a hard plastic case (390 x 280 etc.).

For impact planes, plaster planes, rubankers, combination planes, seam and seam planes.

Staple hammer in light carbon fiber composite structure. Fast and easy charging. Automatic locking with AntiJam pinch lock. Ergonomic design with vibration dampening hammer grip. Fits 6, 8, 10, 12 and 14 mm type G staples.
Weight: 0.699 kg.
Size (LxWxD): 37x4x12.8 cm .

Stapler for high-frequency jobs such as attaching, for example, roofing felt, insulation material, plastic foil, moisture barriers, tarpaulins, goods flags and posters. Opening the magazine to load staples is done with the push of a button. Reversible driver provides double life. Extra large protective plate protects the substrate during stapling. Well-balanced and with an ergonomic handle. For wide wire staples No. 140, 6-12 mm. Details in good quality steel.

Bright galvanized.

Fine wire staples of the highest quality suitable for stapling in textiles. The design of the thread is made so that the smallest possible impact is made on the fibers of the material during stapling. The staple also works excellently for labelling, posting and temporary stapling. The staple wire has been precision cut to achieve the best possible penetration during use.

Wide wire staples. Wide wire that gives a larger installation surface to the material. Suitable for attaching e.g. plastic and other non-fibrous materials.
PP-Box: Plastic box.

Fine wire staples of the highest quality suitable for stapling in textiles. The design of the thread is made so that the smallest possible impact is made on the fibers of the material during stapling. The staple also works excellently for labelling, posting and temporary stapling. The staple wire is galvanized and has been precision cut to achieve the best possible penetration in use.

Staple gun with Powercurve technology where the force of the handle follows the natural force curve of the hand, which makes it easier to push off. Impact strength setting in 3 steps. Suitable for attaching thinner wood or materials such as insulation, plastic film, tarpaulins, cardboard and cardboard. Combination magazine for wide wire staples No. 140, 6-14 mm and diving staples No. 8, 15 mm. Casing in cast aluminium. Details in good quality steel. Ergonomic rubberized handle with locking function.
Weight: 600 g.